EnEV: When modernizing existing buildings resulting in essential constructional modifications of parts of the building (facade, windows and roof), EnEV requirements (German Energy Saving Ordinance) apply. An exception from this rule does only apply if the area of the modified components affects no more than 10 per cent of the total building component area of the building (EnEV §9 Abs. 3). This means, if more than 10 per cent (of the total building area) is modified, EnEV applies and the maximum level of energy consumption of the building / flat must be observed. This means for windows that the U value must not exceed the limit of 1.3 W/m²K.
KfW: To obtain a loan from the German KfW development bank, a specified minimum level of energy efficiency must be observed. The German Energy Saving Ordinance (EnEV) serves as benchmark, but the level of funding rises if the building’s energy efficiency is considerably higher than stipulated by EnEV. In the field of window modernization it is important to make sure that these present a maximum U value of 0.95 W/m²K when realizing single measures funded by KfW. Additionally, walls shall have a better insulation value than windows to make sure that the window pane remains the coolest surface in the room. By this means potential condensation occurs on the window and not on the wall where it could favour mould growth. (For further info see www.KFW.de).
Passive house: Existing buildings refurbished to passive house standards are still relatively rare. However, the German government wants passive houses in the existing building stock to become the standard in the long and medium term. One of the major challenges will certainly be the individual constructional situation of the existing buildings, to which current products for renovation have to be adapted. aluplast is one of the first in the window sector to offer a window element of 70 mm profile depth certified by ift to meet the passive house standard.
The backstop gasket system energeto® 4000 with a profile depth of 70 mm is mostly used in the renovation sector and allures with smooth, filigree profile lines.
The energeto® centre gasket system with a profile depth of 70 mm is irreplaceable especially in the renovation market.
uPVC window with 70mm profile depth
70mm profile depth for outstanding thermal insulation
aluplast Turkiye
Roßlauf 26
4552 Wartberg an der Krems
Austria
Tel. +90 537 760 0026
rdnckrgnlplstnt
aluplast GmbH
Auf der Breit 2
DE-76227 Karlsruhe
Tel. +49 (721) 47171-0
Fax +49 (721) 47171-999
slsntrntnllplstd